REPAIR A BRICKED DRIVE USING XBOX 360 MOD DISC 1 OF 3
This tut teaches you how to change / better a bricked intend using the xbox 360 teenager disc. This entireness with BenQ, Sammy, and Lite-On. The xbox 360 teenager round crapper be institute here: www.megaupload.com
@eZLoverZe? not funny
@mwest23 okay i have an xbox 360? that came with a benq drive but it won’t read its got open tray error i want to replace it with the samsung ts-h943 would these keys let me do that?
how did you get to? dos?
Can someone help me I made a 360modusb and It keeps cycling at step one meaning Ill turn it on and press enter and then it will show me a list of commands but at the bottom it says to press any key to continue and no matter what I press it return back to the previous step 1 page. It also says invalid c drive.? what can I do?
@azhar786118 you can? jtag it and get the key that way
@azhar786118 If the drive is bricked and you don’t have the key – you basically have a paper weight. IF you place another drive? into the xbox with no way of getting your original keys the xbox will only play movies it wont be able to play games.
I dont have key or ofw is there any way to recover my key? i bought the xbox with bricked rive
waiting 4 ur reply
thanks
@mwest23?
Getting happy over here. I just wasn’t sure! My nephew had his drive spoofed a year ago and sine the update 4 months ago, it doesn’t respond at all, no power(bricked)? The guy that spoofed his benQ drive as a lite-on wrote his key on his drive frame.
@YAAUFA? Hell yes that’s OK, you should be fine so long as you have those keys sir.
I dont have the firmware but? I do have the KEy….is that ok?
I wanted to play portal 2 on my modded xbox but it needed updating but wasnt able to do it from the disk for some reason so like an idiot i got the update from the microsoft website and tried updating from a usb. However, that didn’t work out so well and no everytime I turn my xbox on it says applying update then goes cannot update and give me a code and just stays there until i switch it off? Does anyone know how I can fix it??? I tried taking out the hard drive but it didnt? do anything. Help!
Just wanted to say THANK YOU!
Bought a used Xbox 360 with a “bricked” BenQ and thought all hope was lost. This method worked 100% flawlessly and now have a perfectly working flashed 360?
dude can u show me how to fix my jtag if so i will like sub and rate 5
After updating to the new kinect dashboard my jtag doesn’t read Xbox 360 discs anymore in the dvd drive. I? don’t have the original nand and i am new to jtagging. Can u plzzz help me. Msg me back soon thanks.
i would like to know if ur useing? the sirel port
hey do you know how to fix the? e65 error
whats firmware?
i dont have the firmware so? how can i fix my drive.
i got the lite-on OFW.bin would that work to? unbrick my drive
will? this work with a hitachi 59 drive??
the only way is to have the drive reprogrammed. Same thing happened to my 46d. Basically if you send it in to a repair shop (you can find many online, redboxmods, vgc repairs etc) they will de-solder a chip inside the dvd drive and put it into a programmer to wipe it clean then put the old firmware back on. Although if you have your old info its prolly cheaper to get a new drive off ebay? (~$30). You can buy an exact replacement or spoof a new drive. Any questions send me a message
Hey i have a quick question for you and hopefully you can help me out. I have a (Hitachi GDR3120L) drive that i was in the process of flashing. I was spoofing the drive in Jungle Flasher just in case i had to? swap it with my new benq. Before i did anything i got my Org. Firmware and key, but i didn’t restart Jflasher and went to flash it but the flash didn’t go through and bricked it. Do you know a way to revive it? Thanks in advance.
how should i make cd-r and whice speed..Keep saying error? when i reboot
New link? is up!
A new link will be posted later today.?
A new link? will be posted later today.